mirror of https://github.com/sqfmi/Watchy.git
24 lines
1.1 KiB
Markdown
24 lines
1.1 KiB
Markdown
# Watchy - Fully Open Source E-Paper Watch
|
|
|
|
|
|
|
|
[**Pre-order Watchy!**](https://www.crowdsupply.com/sqfmi/watchy)
|
|
Now with injection molded or CNC'd aluminum case
|
|
|
|
Visit [**https://watchy.sqfmi.com**](https://watchy.sqfmi.com) for documentation, hardware design files, and more!
|
|
|
|
## Setup
|
|
1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
|
|
2. Install this library (search for **Watchy** in the library manager), and any other depdencies when prompted
|
|
3. Check out the examples under ```Examples``` -> ```Watchy```
|
|
4. Compile & Upload with these board settings:
|
|
* Board: "ESP32 Dev Module"
|
|
* Partition Scheme: "Minimal SPIFFS"
|
|
* All Other Settings: leave to default
|
|
|
|
You may also have to install the [CP2104 USB to Serial drivers](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers) if the port is not automatically detected
|
|
|
|
### Have Fun! :)
|
|
|
|
|