Watchy - Fully Open Source E-Paper Watch

Pre-order Watchy! Now with injection molded or CNC'd aluminum case

Visit https://watchy.sqfmi.com for documentation, hardware design files, and more!

Setup

1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
2. Install this library (search for Watchy in the library manager), and any other depdencies when prompted
3. Check out the examples under Examples -> Watchy
4. Compile & Upload with these board settings:
   • Board: "ESP32 Dev Module"
   • Partition Scheme: "Minimal SPIFFS"
   • All Other Settings: leave to default

You may also have to install the CP2104 USB to Serial drivers if the port is not automatically detected

Have Fun! :)