29 lines
1.3 KiB

# Watchy - Fully Open Source E-Paper Watch
[**Buy Watchy!**](
[**Watchy Case & Accessories**](
Visit [****]( for documentation, hardware design files, and more!
## Setup
1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here:
* Arduino > Preferences > Additional Board Manager URL's
* ``````
2. Install this library (search for **Watchy** in the library manager), and any other depdencies when prompted
3. Check out the examples under ```Examples``` -> ```Watchy```
4. Compile & Upload with these board settings:
* Board: "ESP32 Dev Module"
* Partition Scheme: "Minimal SPIFFS"
* All Other Settings: leave to default
You may also have to install the [CP2104 USB to Serial drivers]( if the port is not automatically detected
### Have Fun! :)