Watchy - Fully Open Source E-Paper Watch

Buy Watchy at Crowd Supply and Mouser!

Visit https://watchy.sqfmi.com for documentation, hardware design files, and more!

Setup

In the Arduino IDE Boards Manager, install support for the ESP32.
- Arduino > Preferences > Additional Board Manager URLs
- https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
Install this library (search for Watchy in the library manager), and any other dependencies when prompted
Check out the examples under Examples -> Watchy
Compile & Upload with these board settings:
- Board: "ESP32 Dev Module"
- Partition Scheme: "Huge App"
- All Other Settings: leave to default

You may also have to install the CP2104 USB to Serial drivers if the port is not automatically detected.

Click 'Setup Wifi' from main menu on the watch.
Connect to 'Watchy Ap' wifi from another device such as phone or computer / laptop.
Open 192.168.4.1 in the browser. On iphone this page open itself when connecting to wifi.
Click 'Configure WiFi'
Enter SSID and password. (Note: SSID can be prefilled by listed networks on the top of this screen)
Hit 'Save' button and wait for Watchy.
If connection failed, the watchy will display 'Setup failed & timed out!', otherwise it will display the local ip address and SSID of the connected network with confirmation.

Click 'Info' from 192.168.4.1 page.
Check your router setting to make sure the listed mac address is allowed.
If above didn't fix, then try clicking 'Erase Wifi Config' from 'Info' page and wait for Watchy to restart itself. Once it happen, try the wifi setup again and it should hopefully work.