mirror of https://github.com/sqfmi/Watchy.git
22 lines
1.1 KiB
Markdown
22 lines
1.1 KiB
Markdown
# Watchy
|
|
|
|
|
|
|
|
[](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=UD3CRTDKHHPT8)
|
|
|
|
## Setup
|
|
1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
|
|
2. Install the following libraries:
|
|
* [DS3232RTC](https://github.com/JChristensen/DS3232RTC)
|
|
* [GxEPD](https://github.com/ZinggJM/GxEPD)
|
|
* [Watchy](https://github.com/sqfmi/Watchy) (This library)
|
|
3. Check out the examples under ```Examples``` -> ```Watchy```
|
|
4. Compile & Upload with these board settings:
|
|
* Board: "ESP32 Wrover Module"
|
|
* All Other Settings: leave to default
|
|
* You may have to install the [CP2104 USB to Serial drivers](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers) if the port is not automatically detected
|
|
* Have Fun! :)
|
|
|
|
|
|
Looking for Watchy hardware details? Go here https://github.com/sqfmi/Watchy-Hardware
|