mirror of https://github.com/sqfmi/Watchy.git
112 lines
3.3 KiB
C++
112 lines
3.3 KiB
C++
/*
|
|
* Watchy - DOS Watchface Example
|
|
* Sets the RTC time if not set, goes to sleep and wakes up every minute to update the time on the display
|
|
*/
|
|
|
|
#ifndef ESP32
|
|
#error Please select ESP32 Wrover Module under Tools > Board
|
|
#endif
|
|
|
|
#include <DS3232RTC.h>
|
|
#include <GxEPD2_BW.h>
|
|
#include "Px437_IBM_BIOS5pt7b.h"
|
|
|
|
#define RTC_PIN GPIO_NUM_33
|
|
|
|
DS3232RTC RTC(false);
|
|
GxEPD2_BW<GxEPD2_154_D67, GxEPD2_154_D67::HEIGHT> display(GxEPD2_154_D67(/*CS=5*/ SS, /*DC=*/ 17, /*RST=*/ 16, /*BUSY=*/ 4)); // GDEH0154D67
|
|
|
|
void setup()
|
|
{
|
|
esp_sleep_wakeup_cause_t wakeup_reason;
|
|
wakeup_reason = esp_sleep_get_wakeup_cause();
|
|
switch(wakeup_reason)
|
|
{
|
|
case ESP_SLEEP_WAKEUP_EXT0: updateTime(false); break; //RTC Alarm Interrupt
|
|
default: updateTime(true); //Hard Reset
|
|
}
|
|
esp_sleep_enable_ext0_wakeup(RTC_PIN, 0); //enable deep sleep wake on RTC interrupt
|
|
esp_deep_sleep_start();
|
|
}
|
|
|
|
void loop(){}
|
|
|
|
void updateTime(bool reset)
|
|
{
|
|
RTC.begin();
|
|
if(reset){
|
|
RTC.squareWave(SQWAVE_NONE); //disable square wave output
|
|
RTC.set(compileTime()); //set RTC time to compile time
|
|
RTC.setAlarm(ALM2_EVERY_MINUTE, 0, 0, 0, 0);
|
|
RTC.alarmInterrupt(ALARM_2, true); //enable alarm interrupt
|
|
}
|
|
RTC.alarm(ALARM_2); //resets the alarm flag in the RTC
|
|
tmElements_t currentTime;
|
|
RTC.read(currentTime);
|
|
|
|
char time[6];
|
|
time[0] = '0' + ((currentTime.Hour/10)%10);
|
|
time[1] = '0' + (currentTime.Hour%10);
|
|
time[2] = ':';
|
|
time[3] = '0' + ((currentTime.Minute/10)%10);
|
|
time[4] = '0' + (currentTime.Minute%10);
|
|
time[5] = 0;
|
|
|
|
display.init(0, reset); //_initial_refresh to false to prevent full update on init
|
|
display.setFullWindow();
|
|
display.fillScreen(GxEPD_BLACK);
|
|
display.setTextColor(GxEPD_WHITE);
|
|
display.setFont(&Px437_IBM_BIOS5pt7b);
|
|
display.setCursor(0, 24);
|
|
display.println("WATCHY-DOS 1.1.4");
|
|
display.println("Copyright (c) 2020");
|
|
display.println(" ");
|
|
display.print("AUTOEXEC BAT ");
|
|
display.println(time);
|
|
display.print("COMMAND COM ");
|
|
display.println(time);
|
|
display.print("CONFIG SYS ");
|
|
display.println(time);
|
|
display.print("ESPTOOL PY ");
|
|
display.println(time);
|
|
display.println(" ");
|
|
display.println(" 4 files 563 bytes");
|
|
display.println(" 2048 bytes free");
|
|
display.println(" ");
|
|
display.println("<C:\\>esptool");
|
|
/*
|
|
if(currentTime.Hour < 10){
|
|
display.print('0');
|
|
}
|
|
display.print(currentTime.Hour);
|
|
display.print(':');
|
|
if(currentTime.Minute < 10){
|
|
display.print('0');
|
|
}
|
|
display.print(currentTime.Minute);*/
|
|
display.display(true); //partial refresh
|
|
display.hibernate();
|
|
}
|
|
|
|
time_t compileTime()
|
|
{
|
|
const time_t FUDGE(10); //fudge factor to allow for upload time, etc. (seconds, YMMV)
|
|
const char *compDate = __DATE__, *compTime = __TIME__, *months = "JanFebMarAprMayJunJulAugSepOctNovDec";
|
|
char compMon[3], *m;
|
|
|
|
strncpy(compMon, compDate, 3);
|
|
compMon[3] = '\0';
|
|
m = strstr(months, compMon);
|
|
|
|
tmElements_t tm;
|
|
tm.Month = ((m - months) / 3 + 1);
|
|
tm.Day = atoi(compDate + 4);
|
|
tm.Year = atoi(compDate + 7) - 1970;
|
|
tm.Hour = atoi(compTime);
|
|
tm.Minute = atoi(compTime + 3);
|
|
tm.Second = atoi(compTime + 6);
|
|
|
|
time_t t = makeTime(tm);
|
|
return t + FUDGE; //add fudge factor to allow for compile time
|
|
}
|