Mirror of github Watchy

Go to file

Sukhpal Singh 3a7eff4a8e Remove wifi setup guide from readme		2022-12-30 14:23:32 +10:00
examples/WatchFaces	v1.4.3	2022-10-14 22:23:06 -04:00
extras	change line endings	2021-12-30 23:16:03 -05:00
src	Issue #89 Added mac address and local ip	2022-12-28 01:12:48 +10:00
.gitignore	added .vscode for Visual Studio	2021-12-30 14:31:21 -05:00
CONTRIBUTING.md	Add Community block	2021-08-04 11:11:20 -07:00
LICENSE	added license	2021-01-05 16:48:01 -05:00
README.md	Remove wifi setup guide from readme	2022-12-30 14:23:32 +10:00
library.json	v1.4.3	2022-10-14 22:23:06 -04:00
library.properties	v1.4.3	2022-10-14 22:23:06 -04:00

Watchy - Fully Open Source E-Paper Watch

Buy Watchy at Crowd Supply and Mouser!

Visit https://watchy.sqfmi.com for documentation, hardware design files, and more!

Setup

In the Arduino IDE Boards Manager, install support for the ESP32.
- Arduino > Preferences > Additional Board Manager URLs
- https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
Install this library (search for Watchy in the library manager), and any other dependencies when prompted
Check out the examples under Examples -> Watchy
Compile & Upload with these board settings:
- Board: "ESP32 Dev Module"
- Partition Scheme: "Huge App"
- All Other Settings: leave to default

You may also have to install the CP2104 USB to Serial drivers if the port is not automatically detected.