Setup
## Board
In the **Arduino IDE Boards Manager** you will
need to **[Install Support][ESP32]** for the **ESP32** board.
##### Navigate To
**Arduino** **›** **Preferences** **›** **Additional Board Manager URLs**
##### Insert
```
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
```
---
## Library
In the **Library Manager**, search for `Watchy`
and install it and any of its dependencies.
---
## Example
Check out the examples under
**Examples** **›** **Watchy**
---
## Compile / Upload
Use the following settings when building
and leave any other ones at their default.
Setting | |
:------:|:------:|
Board | `ESP Dev Module`
Partition Scheme | `Minimal SPIFFS`
---
## Port
In case your port isn't automatically detected, you may
also need to install the [CP2104 USB To Serial Drivers][Drivers].
[Drivers]: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
[ESP32]: https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html