diff --git a/Documentation/Setup.md b/Documentation/Setup.md
new file mode 100644
index 0000000..b5f0a12
--- /dev/null
+++ b/Documentation/Setup.md
@@ -0,0 +1,12 @@
+## Setup
+1. In the Arduino IDE Boards Manager, [install support for the ESP32][ESP32].
+    * Arduino > Preferences > Additional Board Manager URLs
+    * ```https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json```
+2. Install this library (search for **Watchy** in the library manager), and any other dependencies when prompted
+3. Check out the examples under ```Examples``` -> ```Watchy```
+4. Compile & Upload with these board settings:
+    * Board: "ESP32 Dev Module"
+    * Partition Scheme: "Minimal SPIFFS"
+    * All Other Settings: leave to default
+
+You may also have to install the [CP2104 USB to Serial drivers][Drivers] if the port is not automatically detected.
\ No newline at end of file
diff --git a/README.md b/README.md
index fa05a77..297ac50 100644
--- a/README.md
+++ b/README.md
@@ -11,18 +11,7 @@
 
 ![Preview]
 
-## Setup
-1. In the Arduino IDE Boards Manager, [install support for the ESP32][ESP32].
-    * Arduino > Preferences > Additional Board Manager URLs
-    * ```https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json```
-2. Install this library (search for **Watchy** in the library manager), and any other dependencies when prompted
-3. Check out the examples under ```Examples``` -> ```Watchy```
-4. Compile & Upload with these board settings:
-    * Board: "ESP32 Dev Module"
-    * Partition Scheme: "Minimal SPIFFS"
-    * All Other Settings: leave to default
 
-You may also have to install the [CP2104 USB to Serial drivers][Drivers] if the port is not automatically detected.
 
 ### Have Fun! :)