Watchy/README.md

# Watchy

1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
2. Install the following libraries:
    * [DS3232RTC](https://github.com/JChristensen/DS3232RTC)
    * [GxEPD](https://github.com/ZinggJM/GxEPD)
    * [Watchy](https://github.com/sqfmi/Watchy) (This library)
3. Check out the examples under ```Examples``` -> ```Watchy```
4. Compile & Upload with these board settings:
    * Board: "ESP32 Wrover Module"
    * All Other Settings: leave to default
    * You may have to install the [CP2104 USB to Serial drivers](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers) if the port is not automatically detected
    * Have Fun! :)
Update README.md 2019-11-16 23:19:59 -05:00			`# Watchy`

			`1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md`
			`2. Install the following libraries:`
			`* [DS3232RTC](https://github.com/JChristensen/DS3232RTC)`
			`* [GxEPD](https://github.com/ZinggJM/GxEPD)`
			`* [Watchy](https://github.com/sqfmi/Watchy) (This library)`
			3. Check out the examples under ```Examples``` -> ```Watchy```
			`4. Compile & Upload with these board settings:`
			`* Board: "ESP32 Wrover Module"`
			`* All Other Settings: leave to default`
			`* You may have to install the [CP2104 USB to Serial drivers](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers) if the port is not automatically detected`
			`* Have Fun! :)`