#! /usr/bin/env python3 """RFC 3548: Base16, Base32, Base64 Data Encodings""" # Modified 04-Oct-1995 by Jack Jansen to use binascii module # Modified 30-Dec-2003 by Barry Warsaw to add full RFC 3548 support # Modified 22-May-2007 by Guido van Rossum to use bytes everywhere import re import struct import binascii __all__ = [ # Legacy interface exports traditional RFC 1521 Base64 encodings 'encode', 'decode', 'encodebytes', 'decodebytes', # Generalized interface for other encodings 'b64encode', 'b64decode', 'b32encode', 'b32decode', 'b16encode', 'b16decode', # Standard Base64 encoding 'standard_b64encode', 'standard_b64decode', # Some common Base64 alternatives. As referenced by RFC 3458, see thread # starting at: # # http://zgp.org/pipermail/p2p-hackers/2001-September/000316.html 'urlsafe_b64encode', 'urlsafe_b64decode', ] bytes_types = (bytes, bytearray) # Types acceptable as binary data def _bytes_from_decode_data(s): if isinstance(s, str): try: return s.encode('ascii') # except UnicodeEncodeError: except: raise ValueError('string argument should contain only ASCII characters') elif isinstance(s, bytes_types): return s else: raise TypeError("argument should be bytes or ASCII string, not %s" % s.__class__.__name__) # Base64 encoding/decoding uses binascii def b64encode(s, altchars=None): """Encode a byte string using Base64. s is the byte string to encode. Optional altchars must be a byte string of length 2 which specifies an alternative alphabet for the '+' and '/' characters. This allows an application to e.g. generate url or filesystem safe Base64 strings. The encoded byte string is returned. """ if not isinstance(s, bytes_types): raise TypeError("expected bytes, not %s" % s.__class__.__name__) # Strip off the trailing newline encoded = binascii.b2a_base64(s)[:-1] if altchars is not None: if not isinstance(altchars, bytes_types): raise TypeError("expected bytes, not %s" % altchars.__class__.__name__) assert len(altchars) == 2, repr(altchars) return encoded.translate(bytes.maketrans(b'+/', altchars)) return encoded def b64decode(s, altchars=None, validate=False): """Decode a Base64 encoded byte string. s is the byte string to decode. Optional altchars must be a string of length 2 which specifies the alternative alphabet used instead of the '+' and '/' characters. The decoded string is returned. A binascii.Error is raised if s is incorrectly padded. If validate is False (the default), non-base64-alphabet characters are discarded prior to the padding check. If validate is True, non-base64-alphabet characters in the input result in a binascii.Error. """ s = _bytes_from_decode_data(s) if altchars is not None: altchars = _bytes_from_decode_data(altchars) assert len(altchars) == 2, repr(altchars) s = s.translate(bytes.maketrans(altchars, b'+/')) if validate and not re.match(b'^[A-Za-z0-9+/]*={0,2}$', s): raise binascii.Error('Non-base64 digit found') return binascii.a2b_base64(s) def standard_b64encode(s): """Encode a byte string using the standard Base64 alphabet. s is the byte string to encode. The encoded byte string is returned. """ return b64encode(s) def standard_b64decode(s): """Decode a byte string encoded with the standard Base64 alphabet. s is the byte string to decode. The decoded byte string is returned. binascii.Error is raised if the input is incorrectly padded or if there are non-alphabet characters present in the input. """ return b64decode(s) #_urlsafe_encode_translation = bytes.maketrans(b'+/', b'-_') #_urlsafe_decode_translation = bytes.maketrans(b'-_', b'+/') def urlsafe_b64encode(s): """Encode a byte string using a url-safe Base64 alphabet. s is the byte string to encode. The encoded byte string is returned. The alphabet uses '-' instead of '+' and '_' instead of '/'. """ # return b64encode(s).translate(_urlsafe_encode_translation) raise NotImplementedError() def urlsafe_b64decode(s): """Decode a byte string encoded with the standard Base64 alphabet. s is the byte string to decode. The decoded byte string is returned. binascii.Error is raised if the input is incorrectly padded or if there are non-alphabet characters present in the input. The alphabet uses '-' instead of '+' and '_' instead of '/'. """ # s = _bytes_from_decode_data(s) # s = s.translate(_urlsafe_decode_translation) # return b64decode(s) raise NotImplementedError() # Base32 encoding/decoding must be done in Python _b32alphabet = { 0: b'A', 9: b'J', 18: b'S', 27: b'3', 1: b'B', 10: b'K', 19: b'T', 28: b'4', 2: b'C', 11: b'L', 20: b'U', 29: b'5', 3: b'D', 12: b'M', 21: b'V', 30: b'6', 4: b'E', 13: b'N', 22: b'W', 31: b'7', 5: b'F', 14: b'O', 23: b'X', 6: b'G', 15: b'P', 24: b'Y', 7: b'H', 16: b'Q', 25: b'Z', 8: b'I', 17: b'R', 26: b'2', } _b32tab = [v[0] for k, v in sorted(_b32alphabet.items())] _b32rev = dict([(v[0], k) for k, v in _b32alphabet.items()]) def b32encode(s): """Encode a byte string using Base32. s is the byte string to encode. The encoded byte string is returned. """ if not isinstance(s, bytes_types): raise TypeError("expected bytes, not %s" % s.__class__.__name__) quanta, leftover = divmod(len(s), 5) # Pad the last quantum with zero bits if necessary if leftover: s = s + bytes(5 - leftover) # Don't use += ! quanta += 1 encoded = bytearray() for i in range(quanta): # c1 and c2 are 16 bits wide, c3 is 8 bits wide. The intent of this # code is to process the 40 bits in units of 5 bits. So we take the 1 # leftover bit of c1 and tack it onto c2. Then we take the 2 leftover # bits of c2 and tack them onto c3. The shifts and masks are intended # to give us values of exactly 5 bits in width. c1, c2, c3 = struct.unpack('!HHB', s[i*5:(i+1)*5]) c2 += (c1 & 1) << 16 # 17 bits wide c3 += (c2 & 3) << 8 # 10 bits wide encoded += bytes([_b32tab[c1 >> 11], # bits 1 - 5 _b32tab[(c1 >> 6) & 0x1f], # bits 6 - 10 _b32tab[(c1 >> 1) & 0x1f], # bits 11 - 15 _b32tab[c2 >> 12], # bits 16 - 20 (1 - 5) _b32tab[(c2 >> 7) & 0x1f], # bits 21 - 25 (6 - 10) _b32tab[(c2 >> 2) & 0x1f], # bits 26 - 30 (11 - 15) _b32tab[c3 >> 5], # bits 31 - 35 (1 - 5) _b32tab[c3 & 0x1f], # bits 36 - 40 (1 - 5) ]) # Adjust for any leftover partial quanta if leftover == 1: encoded = encoded[:-6] + b'======' elif leftover == 2: encoded = encoded[:-4] + b'====' elif leftover == 3: encoded = encoded[:-3] + b'===' elif leftover == 4: encoded = encoded[:-1] + b'=' return bytes(encoded) def b32decode(s, casefold=False, map01=None): """Decode a Base32 encoded byte string. s is the byte string to decode. Optional casefold is a flag specifying whether a lowercase alphabet is acceptable as input. For security purposes, the default is False. RFC 3548 allows for optional mapping of the digit 0 (zero) to the letter O (oh), and for optional mapping of the digit 1 (one) to either the letter I (eye) or letter L (el). The optional argument map01 when not None, specifies which letter the digit 1 should be mapped to (when map01 is not None, the digit 0 is always mapped to the letter O). For security purposes the default is None, so that 0 and 1 are not allowed in the input. The decoded byte string is returned. binascii.Error is raised if the input is incorrectly padded or if there are non-alphabet characters present in the input. """ s = _bytes_from_decode_data(s) quanta, leftover = divmod(len(s), 8) if leftover: raise binascii.Error('Incorrect padding') # Handle section 2.4 zero and one mapping. The flag map01 will be either # False, or the character to map the digit 1 (one) to. It should be # either L (el) or I (eye). if map01 is not None: map01 = _bytes_from_decode_data(map01) assert len(map01) == 1, repr(map01) s = s.translate(bytes.maketrans(b'01', b'O' + map01)) if casefold: s = s.upper() # Strip off pad characters from the right. We need to count the pad # characters because this will tell us how many null bytes to remove from # the end of the decoded string. padchars = s.find(b'=') if padchars > 0: padchars = len(s) - padchars s = s[:-padchars] else: padchars = 0 # Now decode the full quanta parts = [] acc = 0 shift = 35 for c in s: val = _b32rev.get(c) if val is None: raise binascii.Error('Non-base32 digit found') acc += _b32rev[c] << shift shift -= 5 if shift < 0: parts.append(binascii.unhexlify(bytes('%010x' % acc, "ascii"))) acc = 0 shift = 35 # Process the last, partial quanta last = binascii.unhexlify(bytes('%010x' % acc, "ascii")) if padchars == 0: last = b'' # No characters elif padchars == 1: last = last[:-1] elif padchars == 3: last = last[:-2] elif padchars == 4: last = last[:-3] elif padchars == 6: last = last[:-4] else: raise binascii.Error('Incorrect padding') parts.append(last) return b''.join(parts) # RFC 3548, Base 16 Alphabet specifies uppercase, but hexlify() returns # lowercase. The RFC also recommends against accepting input case # insensitively. def b16encode(s): """Encode a byte string using Base16. s is the byte string to encode. The encoded byte string is returned. """ if not isinstance(s, bytes_types): raise TypeError("expected bytes, not %s" % s.__class__.__name__) return binascii.hexlify(s).upper() def b16decode(s, casefold=False): """Decode a Base16 encoded byte string. s is the byte string to decode. Optional casefold is a flag specifying whether a lowercase alphabet is acceptable as input. For security purposes, the default is False. The decoded byte string is returned. binascii.Error is raised if s were incorrectly padded or if there are non-alphabet characters present in the string. """ s = _bytes_from_decode_data(s) if casefold: s = s.upper() if re.search(b'[^0-9A-F]', s): raise binascii.Error('Non-base16 digit found') return binascii.unhexlify(s) # Legacy interface. This code could be cleaned up since I don't believe # binascii has any line length limitations. It just doesn't seem worth it # though. The files should be opened in binary mode. MAXLINESIZE = 76 # Excluding the CRLF MAXBINSIZE = (MAXLINESIZE//4)*3 def encode(input, output): """Encode a file; input and output are binary files.""" while True: s = input.read(MAXBINSIZE) if not s: break while len(s) < MAXBINSIZE: ns = input.read(MAXBINSIZE-len(s)) if not ns: break s += ns line = binascii.b2a_base64(s) output.write(line) def decode(input, output): """Decode a file; input and output are binary files.""" while True: line = input.readline() if not line: break s = binascii.a2b_base64(line) output.write(s) def encodebytes(s): """Encode a bytestring into a bytestring containing multiple lines of base-64 data.""" if not isinstance(s, bytes_types): raise TypeError("expected bytes, not %s" % s.__class__.__name__) pieces = [] for i in range(0, len(s), MAXBINSIZE): chunk = s[i : i + MAXBINSIZE] pieces.append(binascii.b2a_base64(chunk)) return b"".join(pieces) def encodestring(s): """Legacy alias of encodebytes().""" import warnings warnings.warn("encodestring() is a deprecated alias, use encodebytes()", DeprecationWarning, 2) return encodebytes(s) def decodebytes(s): """Decode a bytestring of base-64 data into a bytestring.""" if not isinstance(s, bytes_types): raise TypeError("expected bytes, not %s" % s.__class__.__name__) return binascii.a2b_base64(s) def decodestring(s): """Legacy alias of decodebytes().""" import warnings warnings.warn("decodestring() is a deprecated alias, use decodebytes()", DeprecationWarning, 2) return decodebytes(s) # Usable as a script... def main(): """Small main program""" import sys, getopt try: opts, args = getopt.getopt(sys.argv[1:], 'deut') except getopt.error as msg: sys.stdout = sys.stderr print(msg) print("""usage: %s [-d|-e|-u|-t] [file|-] -d, -u: decode -e: encode (default) -t: encode and decode string 'Aladdin:open sesame'"""%sys.argv[0]) sys.exit(2) func = encode for o, a in opts: if o == '-e': func = encode if o == '-d': func = decode if o == '-u': func = decode if o == '-t': test(); return if args and args[0] != '-': with open(args[0], 'rb') as f: func(f, sys.stdout.buffer) else: func(sys.stdin.buffer, sys.stdout.buffer) def test(): s0 = b"Aladdin:open sesame" print(repr(s0)) s1 = encodebytes(s0) print(repr(s1)) s2 = decodebytes(s1) print(repr(s2)) assert s0 == s2 if __name__ == '__main__': main()